Multi-Trigger Imaging - Omron FH-3 Series Reference Manual

Multi-trigger Imaging

This function can be used only with FH series/FZ5-800 series/FZ5-1100 series/FZ5-1200 series. The Multi-
trigger Imaging processing item captures multiple images at user-defined timings and executes parallel
measurement for each image. If you append this processing item in the flow, Multi-trigger Imaging, Multi-trigger
Imaging Task, Camera Image Input FH and Multi-trigger Imaging End will be added as a group. Insert the Multi-
trigger Imaging to the top of the flow. The Multi-trigger Imaging, Multi-trigger Imaging Task, and Multi-trigger
Imaging End cannot be used alone. Please use them as a group.

Reference: Changing the System Environment - Multi-trigger Imaging Function in the Vision System FH/FZ5
Series User's Manual (Cat. No. Z365).
Used in the Following Case
Systems which capture multiple images at user-defined timings and executes parallel measurement for each
image.
Example:
This function takes multiple images of a long and thin workpiece at certain timings. While the system takes
images for multiple times, it executes measurement for each image in parallel. After that, measurement
processing is performed based on the measurement results.
FH/FZ5 Processing Item Function Reference Manual
Move
STEP(0)
1 st STEP
2 nd STEP
rd
3 STEP
STEP(1)
STEP(2)
Image transfer completed
1 st STEP
2. Camera
3. Search
image input FH
2 nd STEP Image transfer completed
5. Camera
image input FH
rd
3 STEP
6. Search
Image transfer completed
8. Camera
9. Search
image input FH

Multi-trigger Imaging

1
87