Conventions Used In This Manual - Omron FH-3 Series Reference Manual

Name of Manual
Vision System FH/FZ5
Series User's Manual
Vision System FH/FZ5
series Hardware Setup
Manual
Vision System FH/FZ5
series Macro Customize
Functions Programming
Manual
Vision System FH/FZ5
series Processing Item
Function Reference
Manual
Vision System FH/FZ5
Series User's Manual
for Communications
Settings
Vision System FH
Series Operation
Manual for Sysmac
Studio

Conventions Used in This Manual

Symbols
The symbols used in this manual have the following meanings.
Indicates relevant operational precautions that must be followed.
Important
Note
Indicates operation-related suggestions from OMRON.
Use of Quotation Marks and Brackets
In this manual, menus and other items are indicated as follows.
[ ] Menu
" " Item name Indicates the item names displayed on the screen.
2
Man.No. Model
Z365
Z366
FH-1
FH-1 -
FH-3
FH-3 -
FH-L
Z367 FH-L -
FZ5-L35
FZ5-L35 -
FZ5-6
Z341
FZ5-6 -
FZ5-11
FZ5-11 -
Z342
FH-1
FH-1 -
Z343
FH-3
FH-3 -
Indicates the menu names or processing items shown in the menu bar.
Proposes
When User want to know how
to setup the Sensor Controller
of the Vision System FH/FZ5
series.
When User want to know
about the Hard-ware
specifications or to setup the
Sensor Controller of the
Vision System FH/FZ5
series.
When User operate or
programming using Macro
Customise functions.
When User confirm the details
of each processing items at
the create the measurement
flow or operate it.
When User confirm the
setting of communication
functions.
When User connect to NJ
series via EtherCAT
communication.
FH/FZ5 Processing Item Function Reference Manual
Contents
Describes the soft functions, setup,
and operations to use Sensor
Controller of the Vision System FH/
FZ5 series.
Describes FH/FZ5 series
specifications, dimensions, part
names, I/O information, installation
information, and wiring information.
Describes the functions, settings,
and operations for using Macro
Customize function of the FH/FH5-
series.
Describes the software functions,
settings, and operations for using
FH/FH5-series.
Describes the functions, settings,
and communications methods for
communicating between FH/FH5
series.
The following communication
protocol are described.
Parallel, PLC Link, EtherNet/IP,
EtherCAT, and Non-procedure
Describes the operating
procedures for setting up and
operating FH series Vision Sensors
from the Sysmac Studio FH Tools.