Key Points For Test Measurement And Adjustment (Set Unit Figure) - Omron FH-3 Series Reference Manual

Key Points for Test Measurement and Adjustment (Set Unit Figure)

The following content is displayed in the "Detail result" area as text.
Displayed items
Judge
Setting target data 0
Setting target data 1
Setting target data 2
Setting target data 3
Setting target data 4
Setting target data 5
Setting target data 6
Key Points for Adjustment
Select the adjustment method referring to the following point.
Judgement will be NG.
Parameter to be adjusted
Setting parameters for
figures
656
Set Unit Figure
Judgment result
Judgment result
Judgment result
Judgment result
Judgment result
Judgment result
Judgment result
Judgment result
• Check if the values entered for the setting figure are correct.
If the setting figure is a rectangle, check that coordinates are specified in the order from top-left
(X, Y) to bottom-right (X, Y). To refer to the measurement coordinates X and Y from other units,
the set order may be the top-right coordinates (X, Y) to bottom-left coordinates (X, Y).
If the setting figure is a circle, check that no negative value is specified as the radius.
• Check that anything other than images are not included in the set figure.
• Check that figure size limit of the setting target is not exceeded.
Description
Troubleshooting
FH/FZ5 Processing Item Function Reference Manual