Position Data Calculation; Settings Flow (Position Data Calculation) - Omron FH-3 Series Reference Manual

Vision sensor fh/fz5 series

Hide thumbs Also See for FH-3 Series:

Table of Contents

Position Data Calculation

Calculates position data and angle data used in the Position Data Calculation based on the measurement results

of multiple processing items. Up to 4 measurement results can be used for the calculation.

It lets users easily calculate "The angle of a line between 2 points" and "the center point of two points" that are

often used in alignment applications.

Used in the Following Case

• When you want to position the FPD panel

Example) When coordinates for the four corns of the work are entered

Calculable position coordinates XY

The position/angle calculation should be set up with the following procedure.

Make sure to set

Calculation Setting (Position Data Calculation)

Settings complete

Test measurement

List of Position Data Calculation Items

Set the data to be processed using a calculation formula. Up to 4 data can be set.

The position data to be output is calculated by calculating the average of the position data of the points

selected in "Calculation target position selection".

The angle data to be output is calculated using the method selected in "Angle calculation method

Reference: Calculation Setting (Position Data Calculation) (p.714)

This item can be changed if necessary. Normally, the factory default value will be used.

Output setting

Select whether to reflect the judgement result to the overall judgement of the scene.

Reference: Output Setting (Position Data Calculation) (p.716)

FH/FZ5 Processing Item Function Reference Manual

Calculable angle (corner formed by 2 points)

Set as necessary.

Output Setting (Position Data Calculation)

Check results/make adjustments

Show Quick Links

Table of Contents