Measurement Parameters (Edge Positions) - Omron FH-3 Series Reference Manual

Measurement Parameters (Edge Positions)

This item specifies the judgement condition for measurement results. Measurement parameter can be changed
as needed to address unstable measurement results.
1
In the Item Tab area, click [Measurement].
The edge profile of the measurement region is displayed as a graph in the Image Display area.
Detected
edge
Measurement
region
Noise level
(yellow)
Edge level
(blue)
Color difference
distribution
Note
• When the region is a circumference or arc, you can display the graph
enlarged in the vertical direction. Place a check at "Zoom" and click the
button to adjust.
2
If necessary, specify a value for each item in the "Measurement condition" area.
For color cameras:
Edge Color Not Specified
Setting item
Edge No.
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
Specify the edge number used to extract edges.
0 to 99 Edge numbers are assigned to detected edges starting from 0 and going
[0] on in the direction from the start point (the arrow point) to the end point
(the direction of arrow) in the selected area.
Edge Color Specified
Description
2
229
Edge Position