Omron FH-3 Series Reference Manual page 820

5
Set the actual coordinates for the
specified point.
The actual coordinate input window is
displayed.
Actual coordinate
Actual coordinate X, Y
The measurement result is added to the list.
6
Set the 2nd, 3rd and subsequent points in the same way.
7
Edit or delete the coordinates as
required.
Select the points to be edited or deleted from
the list.
Click [Edit] or [Delete].
To delete all points, click [Clear All].
8
Click [Generate calibration parameters].
The calibration parameters will be generated.
9
Changes display settings as needed.
Setting item
Display setting
Note
The following processing items can be used for two point measurement in sampling.
• Search
• EC Circle Search
• ECM Search
• Ec Corner
• Ec Cross
• Shape Search II
• Shape Search III
• Edge Position
• Scan Edge Position
• Gravity and Area
• Labeling
818
Camera Calibration
-99999.9999 to 99999.9999 [0]
Setting value
[Factory default]
• [Input image]
• X unit image
• Y unit image
Setting value [Factory default]
Explanation
Select the type of image to display in the Image display area.
The display setting is valid only in the sampling tab screen.
FH/FZ5 Processing Item Function Reference Manual