Omron FH-3 Series Reference Manual page 754

Note
• When you select X(Y) Stage and set X axis as movement axis, only [Y division number] can be applied. In this case,
[X division number] is grayed out. When you select Y axis to the movement axis, [Y division number] is grayed out.
(2)
• When you select the XYθ, θXY, UVW or
UVWR stages in Stage Data function.
• When you select 4-axis robot in Robot
Data function.
Setting item
Effective field of view(%)
Sampling method
Translation sampling
setting
X division number
Y division number
Rotation sampling setting
Machine moving
method
Division point
number
Note
• When you select Xθ(Yθ) or θX(θY) Stage and set X axis as movement axis, only [Y division number] can be applied. In this
case, [X division number] is grayed out. When you select Y axis to the movement axis, [Y division number] is grayed out.
752
Vision Master Calibration
Setting value
[Factory default]
1 to 100
[70.0000]
• [One by one]
• All at once
-
2 to 10
[2]
2 to 10
[2]
-
• [Rotation only]
• Rotation+translation
2 to 100
[2]
Description
Set the effective range of the field of view for the image
input unit.
Select the Sampling method.
This setting item is a sampling method that Stage has to
move to X or T axis. This method is composed of parallel
row to X axis and parallel column to Y axis. An intersection
point of its row and column will be sampling point
Sets the number of lines divided during parallel movement
sampling in this calibration.
Set the number of columns divided during parallel
movement sampling in this calibration.
When data are selected one by one, Measuring Processing
Unit of data not targeted for sampling may be NG.
-
Set the external device movement method for rotational
sampling in this calibration.
Sets the number of division points for rotational sampling in
this calibration.
This setting is grayed out and is not applied when you
select [All at once].
FH/FZ5 Processing Item Function Reference Manual