Omron FH-3 Series Reference Manual page 530

4
As necessary, select Fill profile.
Item
Fill profile
5
Finely adjust the hue, saturation, and brightness if necessary.
Adjust either by adjusting on the color chart or by inputting numbers.
Item
H
S
V
Auto setting
Color inv.
About color charts
528
Extract Color Filter
Set value
[Factory default]
[None] The empty section in the center is not filled in.
In the measurement region, the part between the extracted-color start
point and end point in the X-axis direction is measured as having the
extracted color. Since filling is applied only to the X-axis direction, the
processing is faster than filling up holes.
Input image
Fill outline
The part surrounded by the extracted color, like a doughnut hole, is filled
with the extracted color.
Input image
Filling up holes
Set value
[Factory default]
0 to 359
0 to 255
0 to 255
• Checked
• [Unchecked]
• Checked
• [Unchecked]
Description
File profile image
Image after filling up hole
Description
Specify the color phase (difference of color hues).
Specify color saturation (difference of color saturation).
Specify the brightness (difference of brightness).
Specifying the color to be measured on the image automatically
sets the hue, saturation, and brightness.
Everything other than the specified color becomes the
measurement target.
Hue
Brightness
Saturation
FH/FZ5 Processing Item Function Reference Manual