Code Parameters (Ocr) - Omron FH-3 Series Reference Manual

Setting item
Back margin
Ahead margin
Click [Date update] to update the date information used for the verification characters.

Code Parameters (OCR)

Use this item to change code parameters.
For the code parameters, set the format of code characters used to measure coded dates.
Important
• When a usage period is set, coded characters cannot be used in OCV.
Setting on the Screen
The setting procedure is explained below using the example of X as the code for October.
1
Click [Code parameter] in the Item Tab area.
2
Select the "Code month 1 flag"
checkbox.
Note
Code month 1 and Code month 2
• Two code file patterns can be set to enable readiness for a setup change. Select the checkbox of the file to be
used.
3
In the code detail setting area, select the
"Code month 1 flag" checkbox.
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
0 to 99 [0]
0 to 99 [0]
Description
Set an appropriate count back time from the current time. Set in
units of minutes.
Set this when the printing time is different from the inspection time.
Set an appropriate count forward time from the current time. Set in
units of minutes.
Set this when the printing time is different from the inspection time.
2
471
OCR