Omron FH-3 Series Reference Manual page 325

Setting item
Unit No.
Image data No.
Performing fine adjustment on a static mask
1
To perform fine adjustment on a mask
region, click [Freehand edit] in the Static
mask setting area.
Setting item
Freehand edit
Dot size
2
Click [Return] to exit the free hand edit.
Clearing the static mask setting
To clear the static mask setting, click [Clear].
Creating a dynamic mask
1
In the Mask setting area, select
"Dynamic mask".
2
Set the unit number and image data
number in the Unit reference area.
Setting item
Unit No.
Image data No.
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
Specify the number of the unit whose image will be referenced.
The reference unit should be able to output binarized images.
-
For example, select a labeling filter processing image for advanced
filtering.
0 to 3 If the unit supports advanced filtering, numbers 0 to 3 can be set.
[0] Otherwise, it is fixed to 0.
Setting value
[Factory default]
• [Mask add]
Select a process performed using the free hand edit.
• Mask remove
1 to 20
Set the size of dots used when drawing images on the screen.
[1]
Setting value
[Factory default]
Set the number of the unit being referred to for the mask region.
The reference unit should be able to output binarized images.
-
For example, select a labeling filter processing image for advanced
filtering.
0 to 3 If the unit supports advanced filtering, numbers 0 to 3 can be set.
[0] Otherwise, it is fixed to 0.
Description
Description
Description
Gravity and Area
2
323