Machine Setting (Vision Master Calibration); Calibration (Vision Master Calibration) - Omron FH-3 Series Reference Manual

Machine Setting (Vision Master Calibration)

Select a processing unit (stage data or robot data) under which external device information needed for
calculation of axis movement amount is held.
Important
• [Vision Master Calibration] refers to [Stage Data] or [Robot Data]. Be sure to register [Stage Data] or [Robot Data] with a
given scene.
1
In the Item Tab area, click [Machine setting].
2
Select the processing unit that retains
information on external device.
Information of the selected processing unit is
displayed in the reference data display area.
Displayed contents will be change depending
on selected type of Robot or Stage.
Setting item
Scene No.
Unit No.
Note
• If the number of scenes is increased using the scene group conversion tool, the maximum value that can be
selected in "Scene No." changes.

Calibration (Vision Master Calibration)

This item sets data related to calibration. Sets the number of calibration data to be created and the measurement
processing items to be used for sampling in the arithmetic expression. Also sets the output method for the
calculated axis movement amount.
Displayed contents will be change depending on selected type of Robot or Stage.
1
In the Item Tab area, click [Calibration].
2
Check the calibration data items that you want to set.
Calibration data is created for the checked numbers.
746
Vision Master Calibration
Setting value
[Factory default]
Select a scene number (stage data or robot data) under which external
[Present scene]
device information needed for calculation of axis movement amount is
Scenes 0 to 127
held.
From among the referenced scene numbers, select a processing item
--- (stage data or robot data) under which external device information
needed for calculation of axis movement amount is held.
Description
FH/FZ5 Processing Item Function Reference Manual