External Reference Table (Advanced Filter) - Omron FH-3 Series Reference Manual

• Mask size: 3 × 3
Make settings so that a width around the image frame equal to 1 pixels is not included in the
measurement range.
When a partial scan is used to limit the load range
Set so as not to include the image loading range surroundings.
The width that will not be included in the measurement range is the same as the above.
(In the following figure, mask size:5 × 5).
Image read

External Reference Table (Advanced Filter)

By specifying a number, you can access the following data from processing items that support processing unit
data setting/acquisition, and from control commands.
No. Data name
0 Judge
121 Set measure image Set/Get
131 Output image 1
132 Output image 2
133 Output image 3
135 Output image 1 No. Set/Get
136 Output image 2 No. Set/Get
137 Output image 3 No. Set/Get
606
Advanced Filter
The Measurement region is set within the range
with 1-pixel width a part from borders in screen
(within the dotted line frame)
The 1-pixel area adjacent to the image frame
(the gray area) is not included in the
Measurement region.
The Measurement region is set within the range
with 2-pixel width a part from borders in screen
(the dotted line)
The 2-pixel area adjacent to the image frame
(the gray area) is not included in the
measurement region.
Set/Get
0: No judgement (unmeasured)
1: Judgement result OK
-1: Judgement result NG
Get only -10: Error (image format mismatch)
-11: Error (unregistered model)
-12: Error (Insufficient memory)
-20: Error (Other error)
0 to 3
0: Not output
Set/Get
1: Output
0: Not output
Set/Get
1: Output
0: Not output
Set/Get
1: Output
0 to 15
0 to 15
0 to 15
Data range
FH/FZ5 Processing Item Function Reference Manual