Omron FH-3 Series Reference Manual page 498

About color charts
5
In multiple setting areas, specify each
item.
Setting item
More ranges of
color extraction
6
If necessary, set the display conditions
for displayed images.
Setting item
Exclude
this color
BG color
Image kind
496
Glue Bead Inspection
Setting value
[Factory default]
Checked
If you place a check at this option, you can set up to 8 colors.
[Unchecked]
Setting value
[Factory default]
Placing a check here excludes the pixels in the specified color range from
• Checked the extraction target. The priority order for exclusion is that the higher
• [Unchecked] color extraction range numbers are given priority. This setting is disabled
if "More ranges of color extraction" is unchecked.
• [Black]
• White
The background section outside the extracted image is filled with the
• Red
selected colors.
• Green
• Blue
• Measurement
image
• [All color image]
This selects the state of the image to display.
• Selection color
image
• Binary image
Color phase
Color saturation
Brightness
Description
Description
FH/FZ5 Processing Item Function Reference Manual