Measurement Results For Which Output Is Possible (Stage Data) - Omron FH-3 Series Reference Manual

Setting Item
[Factory default]
• [Direct drive]
θ-axis type
• Linear drive
Distance from 0.0000 to
rotation center 99999.9999
to linear axis [0.0000]
*1, *2, *3: Those function name are displayed on the screen. If you select Y-axis in Movement axis, those name will change
as below.
*1 Y-axis relative angle(X-axis standard)
Y-axis relative angle magnification(X-axis
*2
standard)
*3 X-axis limit

Measurement Results for Which Output Is Possible (Stage Data)

The following values can be output using processing items related to results output. It is also possible to
reference measurement values from expressions and other processing units.
Measurement Character
items string
Judge JG
FH/FZ5 Processing Item Function Reference Manual
Setting value
Select the q axis drive type.
[Direct drive]: Movement method comforting rotation of θ-axis to rotation
axis of motor.
Linear dive: Control rotation of θ-axis with linear movement of motor
rotation.
When you select [Linear], set the distance (L) from rotation center to linear
axis.
Rotation stage
Stage rotation center
Select X-axis as Movement axis
Judgement result
Description
Rotation stage
Motor
Rotation stage
Motor
L
Motor
Select Y-axis as Movement axis
X-axis relative angle(Y-axis standard)
X-axis relative angle magnification(Y-axis
standard)
Y-axis limit
Description
4
737
Stage Data