External Reference Tables (2D Code) - Omron FH-3 Series Reference Manual

External Reference Tables (2D Code)

No. Data name
0 Judge
6 Decoded character count
7 Decoded character string
8 Index
9 Error code
18 Cell recognition rate
19 Contrast
20 Focus
21 Overall quality (Normal:DM)
22 Decode (Normal:DM)
23 Contrast
24 Modulation
25 Fixed pattern damage
26 Axial nonuniformity
27 Grid nonuniformity
28 Unused error correction
29 Print Scale
30 Print Scale X
31 Print Scale Y
Overall quality (Normal:PDF417/
33
MicroPDF417)
Decode (Normal:PDF417/
34
MicroPDF417)
35 RAP contrast
36 RAP reflectance
37 RAP edge contrast
38 RAP modulation
39 RAP defect
40 RAP decodability
41 RAP additional
FH/FZ5 Processing Item Function Reference Manual
Set/Get
0: No judgement (unmeasured)
Get only 1: Judgement result OK
-1: Judgement result NG
Get only Number of characters included in code detected
Get only Character string included in code detected
0 to 35
-1: Where there was no match with any of the index
Get only
comparison strings, or the index comparison string has not
been set up.
0: Completed successfully
-1: The 2D code cannot be found.
Get only -3: Timeout
-7: Process could not be completed with too large a volume
of data.
The rate is calculated based on the "the number of error
code word to be correctable", which is determined by the
size and the error correction level, and the number of error
Get only
code words that are actually corrected.
(1 - (number of error code words corrected) / (number of
error code words that can be corrected)) × 100
Get only 0 to 100
Get only 0 to 100
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Data range
2D Code
2
433