Output Parameter (Calc Axis Move); Key Points For Test Measurement And Adjustment (Calc Axis Move) - Omron FH-3 Series Reference Manual

Output Parameter (Calc Axis Move)

Set how to treat the coordinates to be output to the external device as measurement results. This item can be
changed if necessary. Normally, the factory default value will be used.
1
Click [Output parameter] in the Item Tab area.
2
Specify each of the following items.
Setting item
Reflect to overall
judgement
Output type

Key Points for Test Measurement and Adjustment (Calc Axis Move)

The following results are displayed.
Displayed item
Judgement
Position X difference
Position Y difference
Angle difference
Measurement X
Measurement Y
Measure angle
Reference X
Reference Y
Reference angle
X axis movement
Y axis movement
θ axis angle movement
θ axis linear movement
U axis movement
V axis movement
W axis movement
R axis movement
* The following parameters are displayed in this menu based on the stage type.
Displayed content
X axis movement
Y axis movement
792
Calc Axis Move
Setting value
[Factory default]
• [ON] Select to reflect this function's judgment result to Scene's Overall
• OFF judgment.
Relative position: Calculates the movement amount form the current axis
• [Relative position]
• Absolute position Absolute position: Calculates the movement amount from the homing
Character
string
JG Judgement result
DX Position X difference
DY Position Y difference
DT Angle difference
X Measurement X
Y Measurement Y
TH Angle θ
SX Reference X
SY Reference Y
Reference angle θ
ST
MX X axis movement amount
MY Y axis movement amount
MT θ axis angle movement amount
ML θ axis movement amount
MU U axis movement amount
MV V axis movement amount
MW W axis movement amount
MR R axis movement amount
θXY
XY XYθ
  
  
Description
position.
operation position.
Description
*
*
*
*
*
*
*
*
UVW UVWR X(Y) Xθ(Yθ)

 

 
FH/FZ5 Processing Item Function Reference Manual
θX(θY)
3 axes 4 axes
   
   