Output Parameter (Calc Axis Move By Multipoint) - Omron FH-3 Series Reference Manual

Displayed content
V axis movement
amount
Judgement upper/lower
limit values
W axis movement
amount
Judgement upper/lower
limit values
R axis movement
amount
Judgement upper/lower
limit values
: Show, : Hide
 
Displayed only when the θ axis type is direct drive.
*1:
Displayed only when the θ axis type is linear drive.
*2:

Output Parameter (Calc Axis Move by Multipoint)

Set how the coordinates output to external equipment as measurement results are treated. Change this item as
needed. Normally, the factory default value will be used.
1
Click [Output parameter] in the Item Tab area.
2
Specify each of the following items.
Setting item
Reflect to overall
judgement
Output type
FH/FZ5 Processing Item Function Reference Manual
Not
XY XYθ
selected
  
  
  
Setting value
[Factory default]
• [ON] Specify whether or not the judgement results of this processing unit is
• OFF reflected in the scene overall judgement.
Opposite moving: Calculates the movement amount from the current axis
• [Opposite moving]
• Absolute moving
Absolute moving: Calculates the movement amount from the origin.
θXY
UVW UVWR X(Y)
   
 
 

  
Description
position.
Xθ(Yθ) θX(θY) 3 axes 4 axes
   
   
   
Calc Axis Move by Multipoint
4
805