Settings Flow (Control Flow Plc Link); Settings (Control Flow Plc Link) - Omron FH-3 Series Reference Manual

Settings Flow (Control Flow PLC Link)

Set up control flow PLC link according to the following steps.
Necessary Steps
Start

Settings (Control Flow PLC Link)

Settings completed
Test measurement
List of Control Flow PLC Link Items
The following items can be set in control flow PLC link.
Item name
Set communication and timeout conditions for controlling the measurement flow.
Setting
Reference: Settings (Control Flow PLC Link) (p.847)
You can set this item to change the output parameters.
Output Set the conditions and parameters for outputting measurement results to other processing units or
parameter external devices.
Reference: Measurement Results for Which Output Is Possible (Control Flow PLC Link) (p.849)
Settings (Control Flow PLC Link)
Set communication and timeout conditions for controlling the measurement flow.
1
In the Item Tab area, click [Setting].
2
In the "Communication method" area, specify a value for each item.
Setting item
Communication method
FH/FZ5 Processing Item Function Reference Manual
Optional Steps
Output Parameters (Control Flow PLC Link)
Check results/adjust parameters
Description
Setting value
[Factory default]
• [RS-232C/RS-422] Select the communication method used for controlling
• Ethernet the measurement flow from an external device.
Description
Control Flow PLC Link
5
847