Omron FH-3 Series Reference Manual page 175

Setting item
Outside
(Cross) Length X
(Cross) Length Y
(Cross) Width X
(Cross) Width Y
(Circle) Radius
(Rectangle) Length X
(Rectangle) Length Y
(Diamond) Length X
(Diamond) Length Y
Middle
(Cross) Length X
(Cross) Length Y
(Cross) Width X
(Cross) Width Y
(Circle) Radius
(Rectangle) Length X
(Rectangle) Length Y
(Diamond) Length X
(Diamond) Length Y
3
Click [Color set].
4
In the [Color set] area, specify colors of
the created image.
Setting item
Color set
Front view set
Back view set
5
Click [Return] in the [Color set] area.
6
On the image, click the position you want to use as the center coordinate of the shape.
7
Specify the position in detail by entering values or clicking arrows in the [Set center position]
area.
8
Set [Rotation angle] by entering the value in the [Set center position] area.
9
Select the [Save reg. model] check box if you want to keep the image used for model
registration for future reference.
10
Click [Save image] to save the created image.
11
Click [Regist].
Model registration is finished successfully.
If the [Save reg. model] check box is selected, the registered model image is also saved besides the
model.
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
0 to 9999
[100]
[100]
[20]
[20]
[50]
[100]
[50]
[100]
[50]
0 to 9999
[80]
[80]
[10]
[10]
[25]
[50]
[25]
[50]
[25]
Setting value
[Factory default]
• [Front view set]
Drag the image, and the brightness information set here will be updated.
• Back view set
1 to 255
Set the foreground color of the generated image.
[255]
1 to 255
Set the background color of the generated image.
[1]
Description
Specify the distance from the center to the outline of the shape to
determine the size of the outline.
Unit of measure: pixel
When you specify the length X to 100, the total X direction of figure
is 201 pixels: ±100 pixels from the center of figures.
Specify the distance from the center to the outline of the hollow to
determine the size of the hollow.
Unit of measure: pixel
When you specify the length X to 100, the total X direction of figure
is 201 pixels: ±100 pixels from the center of figures.
Description
2
173
Shape Search III