Selective Branch - Omron FH-3 Series Reference Manual

Selective Branch

The calculation and selection value are set, and based on the matching results of the calculation result and
selection value, they branch out from this processing item.
Up to 32 branch destinations can be set.
Used in the Following Case
• When products on one production line are to be inspected according to a time interval
Example) Inspection of snack products by type (by time)
Product type (1)
inspection
Calculation result: 0
Edge Position
Parallel Judgement Output
List of Selective Branch Items
Item name
Selective This item sets the branch conditions.
Branch Reference: Selective Branch (Selective Branch) (p.865)
Output This item can be changed if necessary. Normally, the factory default value will be used.
Reference: Output Parameter (Selective Branch) (p.866)
parameter
Set the conditions under which the branching processing times out.
Timeout
Reference: Timeout (Selective Branch) (p.866)
864
Selective Branch
Product type (2)
inspection
Calculation result: 2
0
Camera Image Input
1
Selection Branch
2 5
Search
3 6
Parallel Judgement Output
4 7
End
End
Product type (3)
inspection
Calculation result: 8
Calculation result: 2 → 2. Edge position
Calculation result: 5 → 5. Search
Calculation result: 8 → 8. Classification
8
Classification
9
Parallel Judgement Output
10
End
Description
FH/FZ5 Processing Item Function Reference Manual