Settings Flow (Precise Defect) - Omron FH-3 Series Reference Manual

Settings Flow (Precise Defect)

Precise Defect settings are made with the following flow.
Necessary Steps
Start
Region Setting (Precise Defect)
Measurement Parameters (Precise Defect)
Settings completed
Test measurement
List of Precise Defect Items
Item name
This item is used to set up the measurement area.
Instead of measuring the entire input image, narrowing the measurement area shortens the processing
Region setting
time.
Reference: Region Setting (Precise Defect) (p.369)
Set it when masking a region.
Mask setting The measurement result of another processing item can also be used for masking.
Reference: Mask Setting (Precise Defect) (p.370)
This item specifies the judgement condition for measurement results. Measurement parameters can be
changed as needed to address unstable measurement results or to increase the processing speed.
Measurement
Normally, the factory default value will be used.
Reference: Measurement Parameters (Precise Defect) (p.372)
This item can be changed if necessary. Normally, the factory default value will be used.
Judgement
This item specifies the judgement condition for measurement results.
condition
Reference: Judgement Condition (Precise Defect) (p.374)
This item can be changed if necessary. Normally, the factory default value will be used.
Output
Use the output parameter to specify how to handle the coordinates.
parameter
Reference: Output Parameters (Precise Defect) (p.376)
368
Precise Defect
Optional Steps
Mask Setting (Precise Defect)
Judgement Condition (Precise Defect)
Output Parameters (Precise Defect)
Verify/Adjust results
Description
FH/FZ5 Processing Item Function Reference Manual