Omron FH-3 Series Reference Manual page 472

2
In the Select Line (line selection) area, set a value for each item.
Setting item
Select Line
3
In the period setting area, set a value for each item.
Setting item
Year
Month
Day
4
In the date setting area, set a value for each item.
Setting item
Zero suppress
Calculation order
Month end adjust
5
In the common setting area, set a value for each item.
Setting item
Auto Update
470
OCR
Setting value
[Factory default]
• [Line No.1]
• Line No.2
• Line No.3
• Line No.4
Setting value
[Factory default]
0 to 99 [0]
0 to 99 [0]
-999 to 999 [0]
Setting value
[Factory default]
• [0]
• Space
• [MonthDay]
• DayMonth
• [Last day of current
month]
• First day of next month
• Gap day of next month
Setting value
[Factory default]
• Not update
• First measure
• [Always update]
Description
Set the line to which the usage period that will be set in the
subsequent step applies.
Description
Set the usage period from the current date.
Set the usage period from the current date.
Set the usage period from the current date.
Description
Set the display method for the 10's digit when the month or day is
a one-digit number.
Set whether calculation starts from the month or the day when a
usage period is set.
The usage expiration date varies depending on the order of
calculation, such as when the usage period spans a month that
has 31 days and a month that has 30 days. Select this setting
based on the calculation method used for the usage expiration
date.
Select the adjustment method to be used when a non-existent
month and day result from calculation of the usage expiration
date.
Select this setting based on your actual management procedure.
Example: January 31, usage expiration date is one month
"Last day of current month" = February 28
"First day of next month" = March 1
"Gap day of next month" = March 3
Description
Select the condition for updating the date. The time is always
updated.
• Not update
The date is not automatically updated. Update the date using
the menu.
• First measure
The date is updated at the first measurement after the sensor
controller is started up. When the controller is not kept running
more than one day, the date is updated the first time
measurement is performed after the controller is started up
following a change of date.
• [Always update]
The date is updated when measurement is performed. When the
controller is kept running more than one day, the date is updated
the first time measurement is performed after the date changes.
FH/FZ5 Processing Item Function Reference Manual