Region Setting (Intersection) - Omron FH-3 Series Reference Manual

List of Intersection Items
Item name
This item sets the scan edge area (wide line) for each the two sides to be measured.
Region setting
Reference: Region Setting (Intersection) (p.293)
This item sets the color of the edges to be detected.
If the target color changes, this setting is not necessary. If the color is not set, positions in the
Edge color
measurement region where the color changes drastically are detected as an edge.
Reference: Edge Color Specification - For Color Cameras Only (Intersection) (p.294)
The edge position is registered as the reference when the region is set. Change as necessary. This is
Ref. setting changed when measuring the position deviation from a certain position.
Reference: Reference Setting (Intersection) (p.295)
This item sets the parameters relating to edge measurement and Line Regression calculation to measure
Measurement the intersection coordinates.
Reference: Measurement Parameters (Intersection) (p.296)
This item specifies the judgement condition for measurement results.
Judgement
Reference: Judgement Condition (Intersection) (p.299)
This item can be changed if necessary.
Output
Select the measurement result coordinates and set how to handle the coordinates.
parameter
Reference: Output Parameters (Intersection) (p.300)

Region Setting (Intersection)

This item is used to set up the measurement area.
Specify the measurement region for [Intersection Coordinates] by using wide lines.
1
In the Item Tab area, click [Region setting].
2
Select the figure to be set.
3
Use the Drawing tools to set the
measurement region.
To align with the measurement area and
change the number of measurement points,
uncheck this.
4
Click [OK] in the Figure setting area.
• [OK]: Changes the settings and returns to the previous menu.
• [Cancel]: Changes are discarded. Returns to the previous menu.
• [Apply]: Updates the settings without leaving edit window.
5
Set the measurement point and the filter
size for the region.
FH/FZ5 Processing Item Function Reference Manual
Description
2
293
Intersection