Omron FH-3 Series Reference Manual page 421

3
To teach, click [Teaching].
The detailed settings are set automatically.
Setting item
Timeout
Quiet zone Check (only
when the read mode is
Normal)
4
When making the detailed settings, click
"Detail setting" and set each item.
Setting item
Common
Code type
Code color
Code length:
Auto
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
Stop and terminate the process if the measurement for this processing
50 to 99999
item cannot be completed within the specified time period. Note that
[99999]
the actual timeout time may be longer than the specified time period.
• Checked Check if there is any space around 2D code.
• [Unchecked] (When code type is PDF417/MicroPDF417, this function is disable.)
Set value
[Factory default]
• [Auto]
• DataMatrix
• QRCode
• MicroQR
• PDF417
• MicroPDF
• [Auto]
• Black
• White
• [Checked]
• Unchecked
Description
Description
Set the code type.
The readable size for each code type are as follows.
• Symble size
DataMatrix: 64 × 64 cells or less
QRCode: 57 × 57 cells (Version.10) or less
• Size of 1 cell
Normal (DataMatrix/QRCode/MicroQR) :
Image more than 4 × 4 pix.
DPM (DataMatrix/QRCode) : Image more than 4 × 4 pix.
• Module size
Normal (PDF417/MicroPDF417) :
Set aspect ratio to be greater than 3:1, then print it.
Capture image with a horizontal length greater than 3 pix.
Specify the color of the 2D Code to read.
Auto: Select to automatically determine the color setting.
Black: Select this for black 2D Code with white background.
White: Select this for white 2D Code with black background.
Place a check when automatically determining the code length.
2
419
2D Code