Machine Setting (Transfer Position Data) - Omron FH-3 Series Reference Manual

Item list of Transfer Position Data
Item name
Select a processing item (stage data or robot data) under which external device information needed for
Machine setting calculation of axis movement amount is held.
Reference: Machine Setting (Transfer Position Data) (p.777)
The item sets data related to conversion. Sets a calculation formula using the pre-conversion position and
Transfer
axis position and post-conversion axis position.
parameter
Reference: Transfer Parameter (Transfer Position Data) (p.778)
Select whether or not the judgement results of this processing unit is reflected in the scene overall
Output
judgement.
parameter
Reference: Output Parameter (Transfer Position Data) (p.782)

Machine Setting (Transfer Position Data)

Select a processing item (stage data or robot data) under which external device information needed for
calculation of axis movement amount is held.
Important
• [Transfer Position Data] refers to [Stage Data] or [Robot Data]. Be sure to register [Stage Data] or [Robot Data] in the
referenced scene.
1
In the Item Tab area, click [Machine setting].
2
Select the processing unit that retains
information on external device.
Information of the selected processing unit is
displayed in the reference data display area.
Displayed contents may change depending on
the selection type; Robot, or Stage in Stage
Data or Robot Data.
Setting item
Reference scene
No.
Reference unit No.
Note
• If the number of scenes is increased using the scene group conversion tool, the maximum value that can be
selected in "Reference scene No." changes.
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
Select a scene number (stage data or robot data) under which external
[Present scene]
device information needed for calculation of axis movement amount is
Scenes 0 to 127
held.
From among the referenced scene numbers, select a processing item
- (stage data or robot data) under which external device information
needed for calculation of axis movement amount is held.
Description
Description
777
Transfer Position Data
4