Settings Flow (Ec Circle Search) - Omron FH-3 Series Reference Manual

Settings Flow (EC Circle Search)

Set up EC circle search according to the following steps.
Be sure to perform settings
Start
Circle Setting (EC circle search)
Region Setting (EC circle search)
Settings complete
Test measurement
List of EC Circle Search Items
EC circle search items are explained below.
Item name
This item sets the size of the circle to search for.
Circle setting
Reference: Circle Setting (EC Circle Search) (p.147)
This item is used to set up the measurement area.
Narrowing the measurement area instead of measuring the entire input screen shortens the processing
Region setting
time.
Reference: Region Setting (EC Circle Search) (p.148)
This item can be changed if necessary.
Ref. setting Usually, the central position of the registered region is specified as the reference position.
Reference: Reference Setting (EC Circle Search) (p.148)
This item can be changed if necessary.
Select the color of the circle and the background color. If no check is placed at color setting, the circle
Color setting
(edge) is extracted with the brightness difference.
Reference: Color Specification (EC Circle Search) (p.149)
Measurement This item changes the measurement parameter as necessary when the measurement result is unstable.
Reference: Measurement Parameters (EC Circle Search) (p.150)
parameter
This item can be changed if necessary.
Output Normally, the factory default value will be used. Use the output parameter to specify how to handle the
parameter coordinates.
Reference: Output Parameters (EC Circle Search) (p.152)
146
EC Circle Search
Perform as necessary
Reference Setting (EC circle search)
Color Specification (EC circle search)
Measurement Parameters (EC circle search)
Output Parameters (EC circle search)
Results confirmation/adjustment
Description
FH/FZ5 Processing Item Function Reference Manual