Omron FH-3 Series Reference Manual page 283

No. Data name
Monochrome edge
213
detection mode
Edge level Lower limit
214
absolute value
Edge level specification
215
method
216 Measure type
Monochrome Derivation
217
edge detection mode
218 Edge Level Upper limit
Edge level Upper limit
219
absolute value
220 Filter Strength
Setting unit of reference
221
coordinate
Setting type of reference
222
coordinate
Use point coordinate
223
before scroll
224 Position X before scroll
225 Position Y before scroll
6002 Format
*1: The reference coordinates based on the selection in the Method area of the [Ref.setting] tab can be Get only.
*2: The reference coordinates based on the selection of Numerical in the Method area of the [Ref.setting] tab can be Set/Get.
*3: On the screen, this data is displayed as [Edge Upper] when you choose [Position (%) for width of a color] of [Measurement].
*4: On the screen, this data is displayed as [Edge Upper] when [Value of color difference(Max.244)] of [Measurement].
FH/FZ5 Processing Item Function Reference Manual
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
*3
Set/Get
Set/Get
*4
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Data range
0: Light→Dark
1: Dark→Light
color camera: 0 to 442
monochrome camera: 0 to 255
0: %
1: Absolute value
0: Projection
1: Derivation
0: Absolute
1: Dark→Light
2: Light→Dark
0 to 100
color camera: 0 to 442
monochrome camera: 0 to 255
0 to 100
-1 to 9,999
0: Numerical
1: Unit
0: Not use
1: Use
-99,999.9999 to 99,999.9999
-99,999.9999 to 99,999.9999
1: monochrome camera
2: color camera
Circular Scan Edge Position
2
281