Output Parameters (Edge Pitch); Key Points For Test Measurement And Adjustment (Edge Pitch) - Omron FH-3 Series Reference Manual

Output Parameters (Edge Pitch)

Specify how to treat the coordinates to be output to the external device as measurement results. This item can
be changed if necessary. Normally, the factory default value will be used.
Important
• After setting up the measurement parameters, changing the output parameters will cause measurement results to vary
accordingly. If the output parameters have been changed, re-specify the measurement, too.
1
Click [Output parameter] in the Item Tab area.
2
Specify each of the following items.
Setting item
Output coordinates
Calibration
Reflect to overall
judgement

Key Points for Test Measurement and Adjustment (Edge Pitch)

The following content is displayed in the "Detail result" area as text.
Displayed items
Judge
Number of edges
Average pitch
Max. pitch
Min. pitch
Average width
Max. width
Min. width
The image specified in the Sub-image number in image display setting is displayed in the Image Display area.
Sub image number
0
1
240
Edge Pitch
Set value
[Factory default]
As measurement results, select whether to output coordinate values
• [After scroll]
to external devices before or after the position deflection correction is
• Before scroll
applied.
Select whether to reflect the calibration in the values output to the
• [OFF] external device as measurement results.
• ON ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
• [ON] Enables choosing whether or not the judgement results of this
• OFF processing unit is reflected in the scene overall judgement.
Judgement result
Number of edges
Average edge pitch
Edge maximum pitch
Edge minimum pitch
Average edge width
Edge maximum width
Edge minimum width
Explanation of image to be displayed
Measurement image
Profile display
Description
Description
FH/FZ5 Processing Item Function Reference Manual