Camera Selection (Camera Image Input Fh); Camera Settings (Camera Image Input Fh) - Omron FH-3 Series Reference Manual

Camera Selection (Camera Image Input FH)

When multiple cameras are connected, select the camera to use for measurement.
1
In the Item Tab area, click [Select camera].
2
Click [Camera No.] [
camera number.
3
If multiple cameras are connected, the
camera to transfer images for can be selected.
Unchecking the camera check box not being used for current Scene or logging, takt time will be shorten
because can reduce the transfer processing time after image input for that camera.
Important
• Transfer of images for Camera 0 is executed at the same time as image input. Therefore, even if you uncheck Camera 0,
the image transfer time is not shortened.
Note
• The image from the camera selected in [Select camera] will be the object to be measured in the following units.
If you need to switch the camera during the process, insert a [Camera Switching] unit in the scene and switch the image.
Reference: Camera Switching (p.83)

Camera Settings (Camera Image Input FH)

Set the following photographing conditions for each camera.
• Reference: Camera Settings (p.47)
• Reference: Binning Settings (for Monochrome Cameras Only) (p.51)
• Reference: Number of lines to be read (p.51)
• Reference: Electronic Flash Setting (p.52)
Note
• The displayed items differ depending on the camera type and lighting mode. Specify the setting for the following
procedure as necessary in accordance with the use environment.
46
Camera Image Input FH
] and select the
The image selected through the [Select camera]
option in the [0 Camera Image Input] is the object
to be measured.
The image selected through the [Select camera]
option in the [4 Camera Switching] is the object to
be measured.
FH/FZ5 Processing Item Function Reference Manual