Omron FH-3 Series Reference Manual page 236

No.
141 Edge level absolute value
Edge level specification
142
method
Clockwise/
143
Counterclockwise
144 Measure type
Monochrome Projection
145
edge detection mode
146 Edge Level Upper limit
Edge level Upper limit
147
absolute value
148 Filter Strength
Setting unit of reference
158
coordinate
Setting type of reference
159
coordinate
Use point coordinate
160
before scroll
161 Position X before scroll
162 Position Y before scroll
6002 Format
*1: The reference coordinates based on the selection in the Method area of the [Ref.setting] tab can be Get only.
*2: The reference coordinates based on the selection of Numerical in the Method area of the [Ref.setting] tab can be Set/Get.
*3: On the [Measurement] tab of the Properties Dialog Box, this data is displayed as [Edge Upper] when you choose the [Position
(%) for width of a color].
*4: On the [Measurement] tab of the Properties Dialog Box, this data is displayed as [Edge Upper] when you choose the [Value
(442 at the maximum) of color].
234
Edge Position
Data name Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
*3
Set/Get
Set/Get
*4
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Set/Get
Data range
Color camera: 0 to 442
Monochrome camera: 0 to 255
0: %
1: Absolute value
0: Clockwise
1: Counterclockwise
0: Projection
1: Derivation
0: Absolute
1: Dark→Light
2: Light→Dark
0 to 100
Color camera: 0 to 442
Monochrome camera: 0 to 255
0 to 100
-1 to 9999
0: Numerical
1: Unit
0: Not use
1: Use
-99999.9999 to 99999.9999
-99999.9999 to 99999.9999
1: monochrome camera
2: color camera
FH/FZ5 Processing Item Function Reference Manual