Output Parameters (Shape Search Ii); Key Points For Test Measurement And Adjustment (Shape Search Ii) - Omron FH-3 Series Reference Manual

Output Parameters (Shape Search II)

Specify how to treat the coordinates to be output to the external device as measurement results. This item can
be changed if necessary. Normally, the factory default value will be used.
Important
• After setting up the measurement parameters, changing the output parameters will cause measurement results to vary
accordingly. If the output parameters have been changed, re-specify the measurement, too.
1
Click [Output parameter] in the Item Tab area.
2
Specify each of the following items.
Setting item
Output coordinates
Calibration
Reflect to overall
judgement

Key Points for Test Measurement and Adjustment (Shape Search II)

The following content is displayed in the "Detail result" area as text.
Important
• Executing test measurements will update the measurement results and the figures in the image.
Displayed items
Judge
Count
Correlation
Position X
Position Y
Angle
The image specified in the Sub-image number in image display setting is displayed in the Image Display area.
Sub image number.
0
164
Shape Search II
Set value
[Factory default]
• [After scroll] Select output coordinate for external devices. If "after scroll" is chose here
• Before scroll shape search III outputs coordinates after position compensation.
Select whether to reflect the calibration in the values output to the
• [OFF] external device as measurement results.
• ON ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
• [ON] Enables choosing whether or not the judgement results of this processing
• OFF unit is reflected in the scene overall judgment.
Judgement result
Number of detections
Correlation value
X coordinate of the position where the model is detected
Y coordinate of the position where the model is detected
Angle of the position where the model is detected
Explanation of image to be displayed
Measurement image
Description
Description
FH/FZ5 Processing Item Function Reference Manual