Cross Extraction (Ec Cross) - Omron FH-3 Series Reference Manual

Cross Extraction (Ec Cross)

Set the conditions for intersecting lines.
1
In the Item Tab area, click [Cross extraction].
2
In the "Line 0 cond." area, set the
conditions for parallel line 0.
Setting item
Length
Width
3
In the "Line 1 cond." area, set the
conditions for parallel line 1.
Setting item
Length
Width
4
In the "Advanced cond." area, set the
detection conditions.
Setting item
Underrun 0
Underrun 1
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
5 to 4000
Set the length of parallel line 0.
[10] to [4000]
1 to 1000
Set the width of parallel line 0.
[10] to [100]
Setting value
[Factory default]
5 to 4000
Set the length of parallel line 1.
[10] to [4000]
1 to 1000
Set the width of parallel line 1.
[10] to [100]
Setting value
[Factory default]
[0] to [1000]
[0] to [1000]
Description
Description
Description
Set the level to which a cross with a rounded or pointed
intersection or intersection concealed due to external disturbance
is allowed. Set the range of crosses not reaching the intersection
that are still recognized as crosses.
Underrun
Ec Cross
2
207