Judgement (Trend Monitor) - Omron FH-3 Series Reference Manual

Judgement (Trend Monitor)

Sets the warning range for prompting caution before large numbers of NGs occur as well as OK/NG judgement
conditions.
Judgement
upper limit
Limits of warning
(upper limit)
Limits of warning
(lower limit)
Judgement
lower limit
Note
• When a warning occurs, the message "Limits of Warning" is displayed on the screen.
Notification that an alarm has occurred can also be output to external devices if output-related processing units such as
"Parallel Judgement Output" are used to set an arithmetic expression to output measurement results (warnings) from the
trend monitor.
1
In the Item Tab area, click [Judgement].
2
Set up the judgement condition.
Setting item
Upper
Lower
Referred max / min of
indication range
Note
• If the window is entered after measurement is performed a
few times and [Default] is clicked on, optimal judgement
conditions including maximum and minimum
measurement values are automatically set.
666
Trend Monitor
NG
Warning
Warning
NG
Set value
[Factory default]
-999999999.9999
to 999999999.9999
-999999999.9999
to 999999999.9999
• [Checked]
• Unchecked
Description
Specify the range where the measurement result is
judged to be OK.
When checked, the judgement range that can be set
with the upper and lower values becomes the same as
the max. and min. values set in [Display range].
FH/FZ5 Processing Item Function Reference Manual