Measurement Parameters (Ec Circle Search) - Omron FH-3 Series Reference Manual

Measurement Parameters (EC Circle Search)

This item specifies the judgement conditions for measurement results. Specify to what degree OK is still judged
in relation to measurement result coordinates (X,Y) and the circle evaluation value with the model.
1
In the Item Tab area, click [Measurement].
2
Select the search type.
Setting item
Search type
3
Set the measurement conditions.
For single search
Setting item
Radius
Radius range
Candidate level
(Multi search only)
Sort condition
(Multi search only)
Advanced setting
Grouping distance
Sticking out circle isn't
detected
150
EC Circle Search
Set value
[Factory default]
[Single search] This is set when there is one circle in the measurement range.
Multi search This is set when there are multiple circles in the measurement range.
Set value
[Factory default]
1 to 9999
[Radius drawn using
circle resister]
[1] to 9999
[0] to 100
• X ascending
• X descending
• Y ascending
• Y descending
• Eva. ascending
• [Eva. descending]
• Radius ascending
• Radius
descending
• Checked
• [Unchecked]
1 to 10
[4]
• Checked
• [Unchecked]
Description
For multi search
This item sets the radius of the circle measured.
This is displayed on the screen with a solid blue line.
This measures the measured circle radius ± the permitted radius width.
This is displayed on the screen with a broken blue line.
Specify the threshold value used when detecting candidate points in
an EC circle search. Specify a smaller value when model search
results are unstable.
Specify the conditions by which label number is re-assigned.
When sorting referencing the X and Y coordinates, the upper left is
the origin.
Place a check at setting the grouping distance.
When circles measured overlap, this sets the distance for
distinguishing circles.
The smaller this value, the easier to distinguish circles.
Place a check here to include circles within the range only.
FH/FZ5 Processing Item Function Reference Manual
Description