Region Setting (Barcode) - Omron FH-3 Series Reference Manual

List of Barcode Items
Item name
This item is used to set up the measurement area.
Region setting Restricting the measurement area can shorten the processing time.
Reference: Region Setting (Barcode) (p.438)
This item specifies the judgement condition for measurement results. Set the code type and the number of
Measurement characters to be judged as OK.
Reference: Measurement Parameters (Barcodes) (p.439)
Set the measurement results. Judgement results can be classified.
Result setting
Reference: Results Settings (Barcode) (p.442)
Output This item can be changed if necessary. Normally, the factory default value will be used.
Reference: Output Parameters (Barcode) (p.442)
parameter

Region Setting (Barcode)

Specify the rectangular area in which to search for the barcodes.
Restricting the measurement area can shorten the processing time.
1
In the Item Tab area, click [Region setting].
2
Click [Edit].
The figure setting area is displayed.
3
Specify the area in which to search for the barcodes.
The rectangle covering the entire screen is set. Adjust the size and position of the rectangle.
4
Click [OK] in the Figure setting area.
• [OK]: Changes the settings and returns to the previous menu.
• [Cancel]: Changes are discarded. Returns to the previous menu.
• [Apply]: Updates the settings without leaving edit window.
Important
• Set the measurement region to be 2448 × 2044, or less.
• Set the measurement region such that it contains only 1 barcode.
If there is more than one bar code in the measurement region, measurement may not be performed correctly.
• Set the measurement region such that it includes a quiet zone.
438
Barcode
Description
FH/FZ5 Processing Item Function Reference Manual