Log Trustpoint - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

L C
OGGING OMMANDS

LOG TRUSTPOINT

log trustpoint
Overview This command adds one or more trustpoints to be used with the syslog
application. Multiple trustpoints may be specified, or the command may be
executed multiple times, to add multiple trustpoints to the application.
The no version of this command removes one or more trustpoints from the list of
trustpoints associated with the application.
log trustpoint [<trustpoint-list>]
Syntax
no log trustpoint [<trustpoint-list>]
Default No trustpoints are created by default.
Mode Global Configuration
Usage The device certificate associated with first trustpoint added to the application will
be transmitted to remote servers. The certificate received from the remote server
must have an issuer chain that terminates with the root CA certificate for any of the
trustpoints that are associated with the application.
If no trustpoints are specified in the command, the trustpoint list will be
unchanged.
If no log trustpoint is issued without specifying any trustpoints, then all
trustpoints will be disassociated from the application.
Example You can add multiple trustpoints by executing the command multiple times:
awplus#
awplus(config)#
awplus(config)#
Alternatively, add multiple trustpoints with a single command:
awplus(config)#
Disassociate all trustpoints from the syslog application using the command:
awplus(config)#
Related log host
Commands
show log config
613-50157-01 Rev C
Parameter
<trustpoint-list>
configure terminal
log trustpoint trustpoint_1
log trustpoint trustpoint_2
log trustpoint trustpoint_2 trustpoint_3
log trustpoint trustpoint_2 trustpoint_3
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
Specify one or more trustpoints to be added or deleted.
305