Accessing By Mx Component(Mx Sheet) - Mitsubishi Electric GT1685 Connection Manual

6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Set the IP address and port No. in [Ethernet detail
setting for PC and GOT connection].
Set the IP address and port No. to the same as the
Ethernet download setting.
23.5.1 (b) Ethernet download setting
8.
The screen returns to [Transfer Setup]. Click
[Connection Test] to check if Setting/Monitoring tool
for C Controller module has been connected to the
motion controller (Q mode).
23.6.19 Accessing by MX
Component(MX Sheet)
This section explains the procedure to set the FA
transparent function of MX Component(MX Sheet) with an
example of MX Sheet Version2.
POINT POINT POINT
MX Component(MX Sheet) manuals
For details of the MX Component(MX Sheet), refer to
the following manual.
MX Sheet Version 2 Operating Manual
(Introduction)
MX Component Version 4 Operating Manual
When MX Component is used alone
Start [Communication Setting Utility] and start
communication setting from the following step 3.
1.
Click [MX sheet] of Microsoft Excel →[Cell Settings].
Set [Use] and click [Access Data].
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
17
18
19
20
21
22
23
23 - 81