Mitsubishi Electric GT1685 Connection Manual page 832

6.
Double-click [GOT] of the CPU side I/F to display
[CPU side I/F Detailed Setting of GOT].
7.
Check-mark either of the following in [CPU side I/F
Detailed Setting of GOT].
Bus connection
Mark the [via GOT(Bus) transparent mode] checkbox.
Direct CPU connection
Mark the [via GOT (direct coupled) transparent mode]
checkbox.
8.
The screen returns to [Transfer setup]. Click
[Connection Test] to check if MT Works2 has been
connected to the motion controller (Q mode).
23 - 70
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
(2) When connecting the GOT and PLC in Ethernet
communication
1.
Click the Connection Destination view
[Connection Destination]
name)] in the Navigation window of MT Works2.
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PC side I/F
PLC side I/F
Other Station Setting
4.
Double-click [Serial USB] of the PC side I/F to display
[PC side I/F Serial Setting].
5.
Check-mark either of the following in [PC side I/F
Serial Setting].
When connecting the GOT and PC with serial
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
[(Connection target data
: Serial USB
: GOT
: No Specification: