Mitsubishi Electric GT1685 Connection Manual page 697


Exporting/Importing the communication
setting contents
(1) Export
1.
After determining the storage location as necessary,
name the file and save it.
The file format is [*.ini] (fixed).
(2) Import
1.
Enter the name of the file previously saved and open
the file.
The file format is [*.ini] (fixed).

Communication detail settings
Make the settings according to the usage environment.
(3) For the connection with GOT
Item
Set this item when change the
transmission speed used for
Transmission Speed communication with the connected
equipment.
(Default: 115200bps)
Set the number of retries to be
performed when a communication
timeout occurs.
Retry When receiving no response after
retries, the communication times
out.
(Default: 0time)
Set the time period for a
Timeout Time communication to time out.
(Default: 3sec)
Set this item to adjust the
transmission timing of the
Delay Time communication request from the
GOT.
(Default: 0ms)
(4) For the connected equipment
Set the communication detail settings of the driver for
controllers according to the connection type.
Refer to each chapter.
20. GOT MULTI-DROP CONNECTION
20.6 Setting of Serial Multi-Drop Connection Unit
Description Range
4800bps,
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
0 to 5times
3 to 30sec
0 to 300 ms
20 - 29
17
18
19
20
21
22
23