Mitsubishi Electric GT1685 Connection Manual page 448

*1 For the system configuration of the CC-Link module, refer to the following manuals.
*2 For the specifications and inquiries of the CC-Link dedicated cable, refer to the following.
*3 The maximum overall extension cable length and the length between stations vary depending on the cable type to be used and
the transmission speed.
For details, refer to the following manual.
*4 Transient transmission can be performed to only CC-Link modules of function version B or later and software version J or later.
*5 Specify Ver.1 as the mode setting in the Communication Settings to use it.
For details of the settings, refer to the following the manual.
*6 Not available for the universal model QCPU.
13 - 8
13. CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
13.2 System Configuration
CC-Link System Master/Local Module User's Manual QJ61BT11N
Control & Communication Link System Master/Local Module Type AJ61QBT11/A1SJ61QBT11 User's Manual
Control & Communication Link System Master/Local Module Type AJ61BT11/A1SJ61BT11 User's Manual
MELSEC-L CC-Link System Master/Local Module User's Manual
CC-Link Partner Association's home page: http://www.cc-link.org/
CC-Link System Master/Local Module User's Manual QJ61BT11N
Control & Communication Link System Master/Local Module Type AJ61QBT11/A1SJ61QBT11 User's Manual
Control & Communication Link System Master/Local Module Type AJ61BT11/A1SJ61BT11 User's Manual
MELSEC-L CC-Link System Master/Local Module User's Manual
13.3.1 Setting communication interface (Communication settings)