Mitsubishi Electric GT1685 Connection Manual page 845

6.
Select either of the following option from [GOT PLC
I/F] according to the connection configuration.
Direct CPU connection
[Serial]
Bus connection
[Bus connection]
Ethernet connection
[Ethernet]
7.
Select either of the following option from [Connect
module] according to the setting of [GOT PLC I/F]
and click [Next].
• For [Serial]
[CPU unit], [RJ71C24], [QJ71C24], [LJ71C24]
• For [Bus connection]
[CPU unit]
• For [Ethernet]
[CPU unit], [QJ71E71], [RJ71E71], [CC IE Field
Ethernet adapter], [FX3U-ENET-ADP]
[FX3U-ENET(-L)], [CPU unit(FX5)]
For example, set as shown below and click [Next].
[GOT and PLC I/F]: [Ethernet]
[Connection destination unit type]: [CPU unit]
8.
Select [Host(IP Address)] according to the
connection configuration and click [Next].
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
17
18
19
20
21
22
23
23 - 83