Mitsubishi Electric GT1685 Connection Manual page 768

(3) When connecting the GOT and PLC in computer link connection
The following shows the software and the accessible PLC CPUs.
PLC CPU
RCPU
QCPU (Q mode)
LCPU
*1 GX Developer Version 8.62Q or later is required to use the FA transparent function.
GX Developer Version 8.68W or later is required to use the FA transparent function when connecting the QnUDE(H)CPU to the
GOT.
*2 PX Developer Version 1.18U or later is required to use the FA transparent function.
*3 GX Configurator-QP Version2.32J or later is required to use the FA transparent function.
*4 MELSOFT Navigator Version 1.04E or later is required to use the FA transparent function.
*5 GX Works2 Version 1.03D or later is required to use the FA transparent function.
*6 GX Developer Version 8.88S or later is required to use the FA transparent function.
*7 GX Works2 Version 1.11M or later is required to use the FA transparent function.
*8 MELSOFT Navigator Version 1.07H or later is required to use the FA transparent function.
*9 MX Component Version 4.03D or later is required to use the FA transparent function.
*10 Use MX Component Version 3.14Q or later for MX Sheet.
*11 CPU Module Logging Configuration Tool Version 1.04E or later is required to use the FA transparent function.
*12 MX Component Version 4.06G or later is required to use the FA transparent function.
*13 Use MX Component Version 4.06G or later for MX Sheet.
23 - 6
23. FA TRANSPARENT FUNCTION
23.2 Compatible Software
*12
GX Works3, MX Component , MX Sheet
*4
MELSOFT Navigator
*1
GX Developer
*5
GX Works2
*2
PX Developer
*3
GX Configurator-QP
*9
MX Component , MX Sheet
*8
MELSOFT Navigator
*6
GX Developer
*7
GX Works2
GX LogViewer
*9
MX Component , MX Sheet
Software
*13
*10
*10
, CPU Module Logging Configuration Tool
*11