Mitsubishi Electric GT1685 Connection Manual page 838

4.
Check-mark either of the following in [Serial port].
When connecting the GOT and PC with serial
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
5.
Click [Detail].
6.
Check-mark either of the following in [PLC side I/F
setting of PLC module].
Bus connection
[via GOT(Bus) transparent mode]
Direct CPU connection
[via GOT(direct coupled) transparent mode]
7.
As necessary, select a CPU that is targeted in [CPU].
23 - 76
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting

Connecting the GOT and Controller in
Ethernet connection
1.
Right-click a project name to be a target on the
project tree of RT ToolBox2.
Click [Edit Project].
2.
Set [Method] to [CRnQ].
3.
Click [Detail].
4.
Check-mark either of the following in [Serial port].
When connecting the GOT and PC with serial
Mark the [RS-232] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
5.
Click [Detail].