Mitsubishi Electric GT1685 Connection Manual page 151

4.
Set the touch switches on the base screen 1.
By using the go to screen switch function, set a touch switch for shifting the screen to the next screen with a screen
touch, when the connected PLC CPU is the control system (SM1515 is ON).
Select [Object] [Switch]
Set the same size for the touch switch as the base screen size so that touching any place of the screen enables the
switch operation.
Next Screen tab
Screen Type
Go To Screen
Style tab
Display Style
Trigger tab
Trigger Type
Trigger Device
1) Next Screen tab
[Go To Screen Switch] and set the screen switching function.
: Base
: Fixed 2
: None (Shape)
: ON
: SM1515
2) Style tab screen
The following shows the created base screen 1.
4. HOW TO MONITOR REDUNTANT SYSTEM
3) Trigger tab screen
4.2 Direct CPU Connection
1
2
3
4
5
6
7
8
4 - 17