Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
On the [PLC side I/F Detailed Setting of GOT], mark
the [via GOT(Ethernet) transparent mode] checkbox
and click [Setting...].
By clicking [Set], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the built-in Ethernet port QCPU or Ethernet
module, which is firstly connected via a GOT.
Set [QnUDE(H)] or [QJ71E71] for [PLC Type].
23 - 60
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
Specify the number for [Network No.] and [Station
No.] same as the number assigned to the Ethernet
When [QnUDE(H)] is set for [PLC type], the setting is
Specify the IP address for [IP Address] same as the
IP address assigned to the built-in Ethernet port
QCPU or Ethernet module.
The screen returns to [Transfer Setup Connection1].
Click [Connection Test] to check if GX Works2 has
been connected to the QCPU (Q mode).
(b) Connecting to FXCPU
Click the Connection Destination view
name)] in the Navigation window of GX Works2.
The [Transfer Setup Connection1] is displayed.
Set the [Transfer Setup Connection1]:
PC side I/F
PLC side I/F
Other Station Setting
[(Connection target data
: Serial USB
: No Specification