Mitsubishi Electric GT1685 Connection Manual page 71


For GT15, GT14 or GT11
1.
2.
3. 4.
1.
After powering up the GOT, touch [Main Menu]
2.
Touch [Communication setting].
(The screen on the left is not displayed on
GT11.)
3.
The [Communication Setting] appears.
4.
Verify that the communication driver name to
be used is displayed in the box for the
communication interface to be used.
5.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
[Communication setting] from the Utility.
1.1Setting the Communication Interface
1
2
3
4
5
6
7
8
1 - 37