System Configuration - Mitsubishi Electric GT1685 Connection Manual

22.2 System Configuration

22.2.1 Bus connection and serial connection
One GOT can monitor a PLC CPU, temperature controller and servo amplifier, etc. Therefore, the system configuration,
in which several controllers are mixed, can be easily established.
In addition, each system can be monitored on the GOT screen, and the unified management of the information is
possible.
QCPU
OMRON
PLC
OMRON
temperature
controller
MELSERVO-
J2-Super
series
PLC
MELSEC-Q
OMRON PLC
OMRON temperature controller
MELSERVO-J2-Super
OMRON PLC
OMRON temperature controller
22 - 4
22. MULTI-CHANNEL FUNCTION
22.2 System Configuration
Communication driver
Bus(Q)
Connection cable
Connection cable
Connection cable
Connection cable
Connection
Connection cable
type
Bus
For the system configuration between
connection
GOT and the controllers, refer to the
following.
Direct CPU
Each chapter indicating the
connection
system configuration
For the system configuration between
GOT and the controllers, refer to the
Direct CPU
following.
connection
Each chapter indicating the
system configuration
Communication driver
Communication driver
OMRON THERMAC
OMRON SYSMAC
/INPANEL NEO
Bus connection
(Channel No.1)
Direct CPU
connection
GOT
(Channel No.2)
Temperature
controller
connection
(Channel No.3)
Servo amplifier connection
(Channel No.4)
GOT
Channel
Option device
No.
1 GT15-QBUS
2 - (Built into GOT)
3 GT15-RS2-9P
4 GT15-RS4-9S
1
- (Built into GOT)
2
Communication driver
MELSERVO-J3, J2S/M
Number of
connectable
Model
equipment
4 connected
equipment for 1
GOT
(4 channels)
2 connected
equipment for 1
GOT
(2 channels)