Mitsubishi Electric GT1685 Connection Manual page 639

Got1000 series
Table of Contents

Advertisement

(2) MELSECNET/H
Item
Description
Set the network type.
Network Type
(Default: MNET/H mode)
Set the network No.
Network No.
(Default: 1)
Set the station No. of the GOT.
Station No.
(Default: 1)
Set the operation mode of the
GOT.
Mode Setting
(Default:
Online (auto. reconnection))
Set the number of retries to be
performed when a communication
timeout occurs.
Retry
When receiving no response after
retries, the communication times
out.
(Default: 3times)
Set the time period for a
Timeout Time
communication to time out.
(Default: 3sec)
Set the delay time for reducing the
load of the network/destination
Delay Time
PLC.
(Default: 0ms)
Set the number of refreshes to
secure the send/receive data in
station units during
communication.
Refresh
(Default: 1time)
Interval
Valid when [Secured data send/
Secured data receive] is marked
by the control station side network
parameters of the MELSECNET/H
network system.
Set the communication
transmission speed.
Transmission
(Default: 25Mbps)
Speed
When specifying [MNET/10 mode]
as the network type, only 10Mbps
can be set applicable.
*1
For details, refer to the following manual.
Q corresponding MELSECNET/H Network System
Reference Manual (PLC to PLC network)
(3) MELSECNET/10
Range
• MNET/H mode
• MNET/10 mode
• MNET/H EXT mode
Retry
1 to 239
1 to 64
Timeout Time
• Online
(auto. reconnection)
• Offline
• Test between
*1
POINT
POINT
POINT
slave station
*1
• Self-loopback test
• Internal self-
*1
loopback test
*1
• H/W test
0 to 5times
3 to 90sec
0 to 300ms
1 to 1000times
10Mbps/25Mbps
Item
Description
Set the number of retries to be
performed when a communication
timeout occurs.
When receiving no response after
retries, the communication times out.
(Default: 3times)
Set the time period for a communication
to time out.
(Default: 3sec)
When MELSECNET/H communication unit is used
When connecting to the MELSECNET/10 network
using the MELSECNET/H communication unit,
specify [MELSECNET/10 mode] as [Network Type].
18. CNC CONNECTION
18.4 GOT Side Settings
17
18
Range
19
0 to 5times
3 to 90sec
20
21
22
23
18 - 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents