Plc Side Setting; Connecting To Melsec Iq-R Series - Mitsubishi Electric GT1685 Connection Manual

12.4 PLC Side Setting

This section describes the settings of the GOT and CC-
Link IE controller network module in the following case of
system configuration.
POINT POINT POINT
CC-Link IE Field Network Module
For details of the CC-Link IE Field Network module,
refer to the following manual.
CC-Link IE Field Network Master/Local Module
User's Manual
12.4.1 Connecting to MELSEC iQ-R
Series

System configuration
(Network Type: CC IE Field)
■ System configuration (Network Type: CC IE Field)
<GOT>
(Use the default value for settings other
than the following.)
CC-Link IE Field Network
<CC-Link IE Field Network module> *
(Use the default value for settings other than the following.)
Station No.
Mode
Network type
Network No.
Total stations
Network Configuration Settings :
■ [Unit parameter] of GX Works3
*1 The CC-Link IE Field Network module is mounted on slot 0
of the base unit.
The Start I/O No. of the CC-Link IE Field Network module is
set at "0".
RX/RY00 to FFH
RW RW 00 to FFH
W/ r
1
: 0 (fixed)
: Online (normal)
: CC IE Field (Master station)
: 1
: 1
RX/RY00 to FFH
H
RW RW 00 to FFH
W/ r H
12. CC-Link IE FIELD NETWORK CONNECTION

Unit parameter settings of System
configuration (Network Type: CC IE Field)
(1) [Unit parameter] of GX Works3
(a) Unit parameter
Item
Station type Master station (fixed)
*1
Network No.
Station number setting
Station No.
Parameter setting Engineering tool
Network Configuration
Settings
: Necessary
*1 Specify the same network No. as that of the GOT.
12.4 PLC Side Setting
Setting
Set value necessity at
GOT connection
1
Parameter
0 (fixed)
Refer to (b)
: As necessary : Not necessary
12 - 11
9
10
11
12
13
14
15
16