Mitsubishi Electric GT1685 Connection Manual page 120

Example 4: When using CPU direct connection or computer link connection
• Monitor accessible range of devices (other than B or W) of other stations or other networks
Specify the accessing network No. or station as shown in the following table.
(1) To monitor B or W of the connected station (host station) assigned with a network parameter, specify the host
station.
(2) To monitor another station (other than B or W) or another network, specify the station (network No. and station
No.).
Station to be
accessed
Station
QnA (1-1)
connected to GOT
Q (Q mode) (1-1)
Host
AnA (1-2)
──
(1-3)
QnA (2-2)
Other (1-1)
(M)
AnU (2-1)
──
AnU (2-3)
──
AnU (2-4)
──
QnA (L1)
──
AnA (L2)
──
*1 When monitoring the data link system, designate the network No. as 0.
POINT POINT POINT
Monitoring link device B or W
For monitoring devices B and W that are allocated by the link parameter, use the host device number even when
designating devices allocated to another station.
Otherwise, the display speed will be reduced.
3 - 10
3. ACCESS RANGE FOR MONITORING
3.1 Access Range for Monitoring Stations on Network Systems
Control station
Q(Q mode)
(1-1)
Network No.1
AnA
(1-2)
QnA
(L1)
Network No.1
AnA (1-2) QnA (1-3) AnU (2-1)
Other (1-2) Other (1-3) Other (2-1)
Host ── ──
── Host Other (2-1)
── ── Host
── ── Other (2-1)
── ── Other (2-1)
── ── ──
── ── ──
Control station
AnU
(2-1)
Network No.2
QnA
(1-3)
(2-2)
AnU
(M)
(2-3)
Data link
system
AnA
(L2)
Network No.2
QnA (2-2) AnU (2-3) AnU (2-4)
Other (2-2) Other (2-3) Other (2-4)
── ──
Host Other (2-3) Other (2-4)
── Other (2-3) Other (2-4)
── Host Other (2-4)
── Other (2-3) Host
── ──
── ──
How to Upper line:
read the
table
Lower line:
AnU
(2-4)
Data link system
QnA (M) QnA (L1)
Other (1-3)
or ──
Other (2-2)
── ── ──
Host ──
── ──
── ──
── ──
── ── Host
── ── ──
Accessibility
: Accessible
: Not accessible
Network settings
Host
Other (Network No. - Station number)
AnA (L2)
──
──
*1
Other (0-2)
──
──
──
──
Host